dota2鸭脖电竞网址导航

Welcome to the impact testing machine_ Cryogenic tank_ Rubber low temperature brittleness tester_ Impact sample notch broaching machine - Jinan HuiFu testing machine factory! Collect this website | Website map | About us | contact us
National service hotline
fifteen billion six hundred and twenty-one million eight hundred and seventy-eight thousand nine hundred and thirty-five
Impact test low temperature slot | impact specimen notch broaching machine | impact testing machine | universal tensile testing machine

Recommended products

contact us

Hotline:

fifteen billion six hundred and twenty-one million eight hundred and seventy-eight thousand nine hundred and thirty-five

Email: 1685288319@qq.com

Telephone: fifteen billion six hundred and twenty-one million eight hundred and seventy-eight thousand nine hundred and thirty-five

Address: Yuanliu Industrial Park, Central District, Jinan

Current location: homepage > news information > Testing machine industry information >Safety operation procedures for impact test cryometer

Safety operation procedures for impact test cryometer

Article source: Jinan HuiFu testing machine factory popularity: Time of publication: 10:33, May 8, 2019

Impact test cryometer Safe operation procedures
Shandong HuiFu specializes in the production of low temperature test equipment, impact test cryometer, also known as impact test low temperature tank. It is specially designed to provide a variety of low temperature test temperature and closed test environment for impact test, so as to ensure the reliability of measurement data. The instrument adopts compressor refrigeration technology, uses heat balance principle and stirring mode to make the temperature of cooling medium in bath constant and uniform, which fully meets the requirements of various test conditions.

Safety operation procedures for impact test cryometer:
1. Add proper amount of cooling medium into the cooling tank.
2. Place the sample in the clean and cool bath in order.
3. After confirming that the power supply is under the specified voltage and grounding safety, and all parts of the equipment are normal, lift the power switch.
4. Press the temperature setting key (set) for 0.5 seconds and release it to enter the temperature setting state. Press the plus or minus key and the move key to set the temperature. After setting the required temperature, press the setting key for 0.5 seconds to return to the normal operation state and memorize the parameter value. At this time, the equipment starts to work.
5. Press the mixing switch and check whether the cooling medium in the cooling tank has good fluidity.
6. Press the cooling switch.
7. When the medium in the cooling bath is close to the set temperature, the constant temperature heating device will work and the indicator light will flash; when the set temperature is reached, the automatic alarm device will make a sound, and the thermostatic timer will start to record the time and display the constant temperature time. When the operator hears the message, the alarm switch can be turned off. When the thermostatic timer shows the required constant temperature time, the sample can be taken out for test.
8. Press the move key to clear the time value on the display window of the temperature setting value.
9. After the test, turn off the refrigeration switch, mixing switch and power switch.
The above is the safety operation procedures of impact test cryometer introduced by HuiFu. I hope it will help you. For more information about our products, please visit: http://mmakkikki.com

 
Key words: Notched, notched, notched, notched, notched, notched, notched, notched, notched, notched, notched, notched, notched, notched, notched, notched, notched, notched, notched, notched, notched, notched, notched, notched, notched, notched, notched, notched, notched, notched
Home page | Product Center | Certificate of honor | Customer witness | Website map | About us | News and information | contact us